A league's kits, a school store, a week of shop jobs. Order 10 or more 22"-wide sheets and each 5 feet costs $9.90, or $1.98 per foot. Bulk changes the price per foot. Film, ink and press settings stay put; very large runs get a ship date by email before we print.
Five lengths, from 5 to 30 ft. Mix them freely; the order just needs 10 sheets. Ten 5-foot sheets, the smallest bulk order, come to $99.00: past the $69 free-shipping line.
| Length | Sheet size | Price per sheet | Per foot | 10 sheets | |
|---|---|---|---|---|---|
| 5 ft | 22" × 60" | $9.90 | $1.98 | $99.00 | |
| 10 ft | 22" × 120" | $19.80 | $1.98 | $198.00 | |
| 15 ft | 22" × 180" | $29.70 | $1.98 | $297.00 | |
| 20 ft | 22" × 240" | $39.60 | $1.98 | $396.00 | |
| 30 ft | 22" × 360" | $59.40 | $1.98 | $594.00 |
US dollars. Any sales tax that applies is added at checkout.
Head to Bulk DTF Gang Sheets. Any mix of lengths and counts, as long as the total hits 10.
Size each file 22" × the sheet's length at 300 DPI, nothing behind the art. Upload them on the bulk product page, one card per design with its own quantity; File Requirements has the preflight.
Business days, counted from printable files. A very large run can outgrow the 24-hour window; when one does, you get a ship date by email before printing starts.
Uncut sheets in a tracked UPS Express box: 1–3 business days, US street addresses only. UPS skips PO boxes.
Yes. Bulk changes only the price per foot; film, ink and press settings match: 275–300°F, medium-high pressure, 10–12 seconds, hot peel.
At 10 sheets in one order. A standard 5-foot sheet on the DTF Gang Sheet Builder or Upload Your DTF Gang Sheet is $12.90; in bulk the same 5 feet is $9.90. Under 10 sheets, stay on the standard product.
Yes. 2 × 30 ft + 8 × 5 ft = 10 sheets: $118.80 + $79.20 = $198.00. Each sheet gets its own file, so the art can change from sheet to sheet.
Switch to the DTF Gang Sheet Builder, or Upload Your DTF Gang Sheet for finished files. Both run single sheets to 60 feet. Rolls are on Upload only: 165 feet for $299.00, 330 feet for $589.00.
Yes. $9.90, once, and every sheet in the order goes to press before the standard orders in line. Rush can't shrink a very large run, though: if it outgrows the 24-hour window, you get a ship date by email before printing starts.
Same 7-day rule: photos (or a short video) plus the order number, from the original buyer, within 7 days of delivery. A defective, damaged or wrong sheet is printed again and sent back out free. Change-of-mind returns don't apply to custom prints. The refund policy has the full terms.
DIAL IT IN
Three settings and a hot peel, the same for one transfer by size or a 60-foot sheet.
Temperature
135–150°C
Time
poly 10 s, cotton up to 12 s
Pressure
lock it down, no rocking
Peel while it is hot
then a 3–5 s finishing press
Close on the bare blank for 3–5 seconds. Moisture out, wrinkles flat.
Film side up, print against the fabric. Square it to the collar or a seam before you close the press.
275–300°F for 10–12 sec at medium–high pressure. Aim for the top of the range on heavy cotton.
Pull the film while it's hot, one steady motion. Parchment on, 3–5 seconds to seal.
| Fabric | Temp | Time | Note | ||
|---|---|---|---|---|---|
| Cotton | 290–300°F | 10–12 s | use the top of the range | ||
| Polyester | 275–285°F | 10 s | stay low: poly dye can migrate | ||
| Blends | 285–295°F | 10–12 s | middle of the range | ||
| Fleece / hoodies | 290–300°F | 12 s | flatten the nap with a 3 s pre-press | ||
| Canvas / totes | 290–300°F | 12 s | slide a pressing pad inside to clear the seams | ||
| Denim | 290–300°F | 12 s | press around rivets and heavy seams |
Platens drift a few degrees. Check yours with a temperature strip or probe, then press the test piece on the same fabric as the order.
